Installation Guide: Step 3-1

Fitting Bottom Track Liner

Step 1
Measure between wall to wall or skirting (If you choose not to remove skirting). Cut the liner to size minus 2mm. Drill 5mm holes centrally in width of the liners approx. 150 mm from each end and space out the remaining screws evenly at a maximum of 500mm centres.
(Click to view larger illustration of Installation Guide: Step 3)






<previous> <next>

Installation Guide

This step-by-step guide is designed to ensure the correct Installation of the Sliding Wardrobe components.

Download Installation Guide pdf here

Step 1:
Liners and End Panels
Liners: Preparation

Step 2:
Fitting of End Panels

Step 3:
Fitting Bottom Track Liner
Wall Liner

Step 4:
Cutting Top and Bottom Track
Installing Top Track
Installing Bottom Track

Step 5:
Installing the Doors
Adjust Doors

Step 6:
Completed Installation

Sliding Wardrobe Warehouse | Made to measure sliding wardrobe doors in steel, aluminium and wood finishes.
Mirrors, wood effect panels, coloured or frosted glass available.

Sliding Wardrobe Warehouse, high quality, design and installations cover the following Surrey and Sussex Areas:
Ashtead, Bookham, Brighton, Buckland, Capel, Caterham, Chessington, Crawley, Dorking, Effingham, Epsom, Fetcham, Godalming, Guildford,
Horsham, Kingston, Leatherhead, Reigate, Westcott, Worthing